EDK M100BP portable multi-component biogas analyzer_北京杜克泰克科技有限公司

EDK M100BP portable multi-component biogas analyzer

EDK M100BP portable multi-component biogas analyzer

Analysis CO2 CH4 O2 H2S	Low-cost solution
Measuring CO2 and CH4 via Nondispersive infrared technology NDIR	Portable battery-powered version
Long-life hydrogen sulfide sensor with automatic air purifier	Modbus、Profibus、Ethernet(optional)
ARM processor	Automatic zero adjusting
Touch screen display	Data downloadable via SD card
Ethernet and USB remoting

EDK M100BP series multi - gas analyzer produced by ETG company. Because of their accuracy, stability, reliability, wide range and multifunction, it is the best choice for biogas measurement and industrial combustion analysis.

Unlike other analyzers, EDK M100B non-dispersive infrared (NDIR) gas analyzers use a single optical path measurement platform to detect a variety of gases. When using methane as a biofuel, a single gas analyzer is not available because the gas usually contains a large amount of CO as a pollutant. In addition to methane, the EDK analyzer can also measure CO2, CO and O2, thus providing the best combination of gas analysis for combustion optimization.

After initial warm-up, our enhanced optical and electronic NDIR analyzer truly eliminates zero drift. Range drift in many other NDIR instruments is eliminated by means of temperature and pressure compensation.

EDK M100BP multi-component biogas analyzer

Measuring Method	Gas	Resolution	Range	Accuracy	Precision	Response Time
NDIR	CH4	0.01%	0-M100BP% 0ppm-100% 40-80% 80-M100BP%	+/‐ 1% F.S +/- 2% actual value +/- 1% actual value +/- 5% actual value	+/- 0,8%	T90 & T10<10 s
NDIR	CO2	0.01%	0-50% 0.00-16.00% 16.01-20.00%	+/- 0,8 F.S. +/- 0,3% absolute value or +/- 3.0% actual value +/- 5% actual value	+/-0,7% +/- 0,1% absolute value or+/- 0.8% actual value	T90 & T10<10s
Electrochemical sensor	O2	0,01%	1.01-25.00%	+/- 0,1% absolute value or +/- 3.0% actual value	+/- 0,1% absolute value or +/- 1.5% actual value	<40秒from ambient to 0.15 O2
Electrochemical sensor	H2S	1ppm	0-2000 ppm 0-5000 ppm	+/- 5 ppm absolute value or+/- 3.0% actual value	+/- 5 ppm absolute value 或 +/- 3.0% actual value	T90 & T10<20 s

Response time	Response time refers to the flow rate of the sample through the gas sample pool at 1L/ min
Data refresh rate	1s
Warm up time	30 seconds for preparation, 3 minutes for use, and 30 minutes for full operation
Operation temp.	-10℃ to 70℃ ( 32℉to 158℉)
Operation humidity	95% RH (no condensation)
Operation altitude	-300m to 3000m（-1000至10000ft）
Communication	USB port (standard)
Protective housing	IP67(Immerse 1m in 30 minutes） Def Stan 81-41/STANAG 4280

Specification

EDK M100BP multi-component biogas analyzer

Battery	12Vcc Internal charger and charging indicator light
Display	5.7-inch resistive touch screen
Calibration	Optional zero/range calibration or automatic calibration
Extension power supply	M100BP~240VAC @47~63Hz
Pneumatic interface	Outside diameter 6.0 inside diameter 4.0 quick plug
Optional	Humidity sensor, nitrogen measurement, flow measurement, hydrogen
Weight	2.5kG

Other versions of the biogas analyzer

Wall-mounted biological gas analyzer model 6500

19’’ rack type biological gas analyzer EDK M100B

Multi-sampling system used for the biogas analysis system