M100 SYN SynGAS Portable MULTICOMPONENT ANALYZER_北京杜克泰克科技有限公司

M100 SYN SynGAS Portable MULTICOMPONENT ANALYZER

M100 SYN SynGAS Portable MULTICOMPONENT ANALYZER

Analysis of CO₂, CH₄, O₂, H₂S
NDIR technology for CO₂ and CH₄
Arm Processor
Touch Screen monitor
Ethernet, Wi-fi and USB Remonting
Low cost ownership
Portable version with battery pack
Data downloadable on USB Pen Drive
Dust Filter front panel
Calorific value data

The MCA 100 Bio series of gas analyzers by ETG it’s the ideal solution for biogas measurement and industrial combustion applications because of their accuracy, stability, reliability, broad measurement range, and the variety of available form factors.

Unlike other analyzers, ETG MCA 100 non-dispersive infrared (NDIR) gas analyzers measure multiple gases in an instrument with a single optical path platform.

Single-gas analyzers are inadequate when using methane as a biofuel because the gas often contains large amounts of CO as a contaminant. ETG analyzers have the ability to measure CO2, CO, and O2 in addition to methane and therefore provide the optimal combination of gases for combustion optimization.

The enhanced optics and electronics of our NDIR analyzers have virtually eliminated zero drift after the initial warm up period. The temperature and pressure compensation eliminates the major causes of span drift in many NDIR instruments.

M100 SYN BIO MULTICOMPONENT ANALYZER FOR BIOGAS

Measurement Method	Gas	Resolution	Range	Accuracy	Precision	Time
NDIR ( Non-Dispersive Infrared )	Methane	0.01%	0-100% 201ppm-40% 40-80% 80-100%	+/- 1% F.S. +/- 2% rel +/- 1% rel +/- 5% rel	+/- 0.8%	T90 & T10 < 10 s
NDIR ( Non-Dispersive Infrared )	Carbon Dioxide Carbon Monoxid	0.01% 0.01%	0-50% 0.00-16.00% 0.01-20.00% (up to 40%)	+/- 0.8 F.S. +/- 0.3% abs or +/- 3.0% rel +/- 5% rel	+/-0.7% +/- 0.1% abs or +/- 0.8% rel	T90 & T10 < 10 s
Electro-chemical sensor	Oxygen	0.01%	1.01-25.00%	+/- 0.1% abs or +/- 3.0% rel	+/- 0.1% abs or +/- 1.5% rel	<40s from ambient to 0.15 O2
Electro-chemical sensor	Hydrogen	0.01%	0-10% 0-20% 0-50% 0-100%	+/- 0.5 abs or +/- 3.0% rel	+/- 0.5 abs or +/- 3.0% rel	T90 & T10 < 20 s

Specifications

Response Time	Response times are specified at a sample flow rate of a 1 liter per minute through the MCA 100 sample cell
Data Refresh Rate	1 second
Warm-up Time	30 seconds ready,3 minutes useable,30 minutes to full performance
Operating Temperature	0°C to 70° C ( 32° to 158° F)
Operating Humidity	To 95% RH ( Non-condensing)
Operating Altitude	-300 to 3.000 m ( -1.000 to 10.000 ft )
Communications	USB port ( standard )
Case Protection	IP67(1 meter submersion for 30 minutes) • Def Stan 81-41/STANAG 4280

M100 SYN BIO MULTICOMPONENT ANALYZER FOR BIOGAS

Battery	12 – 24 Vcc with Internal Charger and light charge indicator
Monitor	Touch Screen 5.7” Resistive type
Calibration	Zero & span user selectable. Automatic calibration ( optional)
External Electrical supply	from 100 to 240 Vac 47-63 Hz
Pneumatic connection	Rapid fittings 6.0 OD 4.0 ID
Mechanical dimensions	50 x 28 x 40 cm
Weight	7.5 kg

Charts and Figures Trend Charts and Numbers

All the ETG MCA 100 and 6500 series for Syngas have Remote Support and Remote Access

· File transfer

· Data monitoring by your PC , tablet and smartphone

· Software update